SpaceGuard Products
Seymour, Indiana, 47274
United States
800-841-0680
SpaceGuard Products Company Profile
Walk into any warehouse or manufacturing facility, and you’ll encounter one of the critical components of the material handling industry, pallet rack storage systems. Though they vary in type and design, all pallet rack systems are used to keep products organized and to provide additional storage space by working vertically.
According to Aigner Index, “nearly 80% of all industrial storage is on pallet rack.”
Warehouse rack guarding systems are designed to prevent products from falling off a bay of racking and landing on a passerby. Brackets allow for varying offsets and systems can be designed to go above the uppermost bay, ensuring proper coverage and safety. This hard guarding provides a hard stop for stored materials, unlike industrial netting which is designed to catch materials. The steel mesh also prevents sharp or unbalanced loads from falling through.
Wire mesh rack safety systems can also keep your company NFPA compliant. By attaching steel mesh panels to the inside of back-to-back uprights, the panels keep the flue space open allowing flames to vent up rather than out creating a vertical rise helping to slow down the horizontal spread. Sprinklers can reach burning material without obstruction.
Wire mesh panels and doors can also be configured to fully enclose bays of rack. Pallet rack enclosures provide controlled access to high-cost items as well as combustible or otherwise hazardous materials.
BeastWire Rack Safety Panels are found in almost any warehouse using a pallet rack system to store products and inventory. Our panels are constructed of 10-gauge or heavier-duty 6-gauge wire welded in a 2” square mesh pattern and welded securely into a 1-1/4” x 1/8” thick full angle frame—providing the ultimate strength and durability.
The BeastWire rack panels attach to the existing uprights with either our patent-pending Grrripper Bracket or the innovative L-shaped and Sleeve brackets.
The BeastWire Grrripper Bracket (Patent Pending) is the world’s first and only drop-in bracket. The pin drops into a tear-drop upright and won’t disengage from the rack upon impact when it’s installed correctly. The Grrripper Bracket saves on install time and money.
With the L-shaped brackets, offsets can be adjusted in the field using various pre-punched holes. The sleeve brackets use a U-shaped bolt which is designed to go around an upright; a great option when attaching to an upright is not allowed. Multiple bracket types ensure that BeastWire Rack Safety Panels will attach to all uprights.
BeastWire Warehouse Rack Safety Guarding Panels are preferred over most netting because it provides a definite stop to keep unit loads or stray boxes from falling below or into the flu space between uprights. Unlike plastic netting or nylon mesh—which are flexible by nature, BeastWire’s welded wire mesh design, won’t allow sharp objects to damage or cut through the wire providing a more secure guarding and NFPA compliant solution.
Add another level of security to the front of pallet racking and thwart off theft by using a bi-parting hinge door which attaches directly to the pallet rack uprights. Pivot brackets are available in single mount or double-pin (shared) when used between two adjacent doors. All doors come equipped with padlock hasp and install in minutes.
Slide doors which use an independent post system are also available when aisle space is limited, or additional locking mechanisms or strikes are required.
Panels can be supplied to protect the ends/sides of pallet racking and attach with basic angle clips.