Hydraulic upender tilts heavy payload objects
Increases stability for tilting and manipulating product while reducing damage and injuries
The Beacon World Class Products BHUE Series Hydraulic Upender increases stability for tilting and manipulating product while reducing damage and injuries. The Upender is designed to tilt loads safely up to 90 degrees.
Tilting weight capacity of the standard models are available ranging from 2,000 to 12,000 lbs. Standard tilt models range from a lowered height of 10 inches to a raised height of 18 inches. Platform standard widths range from 24 inches to 48 inches wide and from 36 inches to 72 inches long. The platform size should be specified when ordering. To keep the warranty valid you cannot cantilever the geometric ratio weight beyond the center of gravity. All units are quoted with an evenly distributed load capacity within its deck size. Special hydraulic models are available with capacities above 12,000 pounds. The special heavy capacity units greater than 12,000 pounds will include redesign and engineering time, heavier capacity hydraulic cylinders, thicker deck, redefined substructure and clevises points.
The unit is powered by an internally mounted 1-1/2 Hp 230 Vac, 1 Ph., 60 Hz or 208/230/460 Vac, 3 Ph., 60 Hz intermittent duty TENV super torque motor or 3 Hp 208/230/460 Vac, 3 Ph., 60 Hz continuous duty TENV motor. Please specify required voltage when ordering.
Hydraulics include double acting hydraulic cylinders, internal high pressure gear pump with manifold mounted check valve, relief valve, pressure compensated flow control valve, solenoid valve, suction and return filters.
Depending on size the Upenders can either be mounted on scissor lifts or used as a free standing upender anchored to the concrete floor.
Options include hydraulic compression clamp, accordion safety skirt, remote power unit, key operated push button control, foot operated control, straight toeguards, electric toeguards, beveled toeguards, conveyor tops, oversize platforms, V-cradle and ball transfer tops.
Many Fortune 500 companies and governments rely on Beacon in the material handling industry. As one example that has utilized the Beacon Upender is a company for more than 100 years has designed ground breaking wallboard products and ceiling suspension systems with over 1100 patents. The Beacon Upender has proven to be a useful tool for the company to accomplish its needs, Event ID: BE-10801.
Choose from various Upenders Beacon has to offer to fit your tilting needs.
Learn more about this product.
Beacon provides value added, for industry standard or design to build core products in the material handling industry.
See our listing in the Modern Materials Handling Buyer's Guide
12300 Old Tesson Rd.
St. Louis, Missouri 63128
Tel: 1 (314) 487-7600
1 (800) 454-7159
Fax: 1 (314) 487-0100
The Beacon World Class Products BPST Series Portable Scissor Lift Table increases productivity while decreasing back fatigue and injuries. The Table can be utilized at
Beacon World Class standard and special size hydraulic and manual dock levelers provide solutions for new and old building construction.
Edge-of-dock levelers decrease back strain
A line of edge-of-dock levelers uses a lever bar to operate. Easier and safer to operate than a standard dock plate, the
The BS-62 powered hand truck series features a capacity of 2,000 pounds with a raised height of 62 inches and a lowered height of 2.25 inches. Depending on the
Blind corners inside facilities can be safer with the introduction of the Safe-T-Signal intersection warning system by Rite-Hite. The ceiling-mounted system alerts
Effective and affordable pallet push-through prevention, Quickly protect employees, flue spaces, walkways, and work areas from falling products, No retrofitting or
Safety net systems with a variety of load retention capacities installs quickly and easily.